#1 TikTok Ads Spy Tool

A Better Way to Make TikTok Ads Dropshipping & TikTok For Business

  • Find TikTok winning products & TikTok dropshipping ads.
  • Analyze TikTok advertisers
  • Get the Latest TikTok Shop Data.
Try It Free

ads 15-in x 20-ft corrugated culvert pipe

Published on: July 6 2023 by pipiads

Advanced Drainage Systems (ADS) is the world's largest manufacturer of corrugated high-density polyethylene drainage pipes. They offer a variety of drainage solutions, including driveway culverts, which are an ideal solution to manage excess flow and prevent downstream flooding and erosion along a roadway.

Steps to Properly Install a Driveway Culvert:

1. Contact your local utility notification center before digging to locate any underground utility lines.

2. Obtain any necessary permits for your project.

3. Effectively manage traffic during construction to reduce motorist traffic delays, ensure worker safety, complete the project in a timely manner, and maintain access for businesses and residents.

4. Determine the size and type of pipe needed to handle the expected flow for your project.

5. Excavate a trench from the outlet to the inlet point, making sure to allow for positive drainage.

6. Place and compact crushed stone in the bottom of the trench as bedding for the pipe.

7. Cut the pipe to the appropriate length, deburr the end if needed, and lay the pipe starting at the outlet point.

8. Make any fittings or coupler connections needed to reach the designated outlet point.

9. Place and compact pipe embedment material around and above the pipe up to 12 inches above the crown.

10. Install a flared end section at the inlet and outlet points for more effective drainage.

11. Backfill soil over the driveway side slopes to allow for grass seating.

12. Place and compact the final backfill, then place and compact the subgrade material in preparation for the driveway.

13. Inspect and clean the culvert regularly to extend its life and effectiveness.

Additional Drainage Solutions:

In addition to driveway culverts, ADS offers a variety of other drainage solutions to control erosion and ensure proper drainage around your home and lawn. Visit their website at ATSpipe.com for more information.

How to Install Dual Wall Culvert Pipe 101 for DIY'ers

The French Drain Man channel on YouTube started putting up videos to help DIY enthusiasts with their projects. As more and more questions came in, the channel decided to focus on the basics. In this video, they will show how to install a driveway culvert pipe.


- If you don't have a lift, pack the culvert pipe in stone.

- Set the pipe in the ground partially, about a third of the way.

- Pack stone on both sides of the pipe.

- If you only have a foot over top of it, that's enough to give it strength.

- If you have more than two feet of soil, you don't need to pack it in stone.

Proper Installation:

- Use a long level to make sure the bubble is upstream.

- If the bubble is downstream, sediment and dirt can fill the culvert pipe and cause maintenance issues.

- Make sure the pipe is bubbling upstream for proper installation.

- Using a Baughman dual wall heavy-duty culvert pipe can last for 200 to 500 years.

- Pack the culvert pipe in stone for added strength.

- Doing it right the first time is important to prevent maintenance issues.

- Share your questions and comments to keep learning and improving.

DIY Installing a Culvert Pipe in the woods - 20' ADS Plastic

Title: Installing a Culvert Crossing on Your Property

Are you in need of a culvert crossing on your property? In this article, we will take a look at one example of installing a culvert crossing and the steps involved in the process.

Step 1: Base and Slope

One of the most important things to consider when installing a culvert crossing is the base and slope. Validate that the slope is good and that water will run through it properly before setting the culvert in place.

Step 2: Installing the Culvert

Before putting the aggregate on top of the culvert, set it in place. Drive in some 2x2 posts and center supports for stability.

Step 3: Adding Fill Material

Haul sand and clay mixture over to the crossing and lay a thin coating of sand to ensure it is flat and the slope is good. Continue to add fill material and compact it with the tractor's weight.

Step 4: Stabilizing the Culvert Ends

Once all the fill material is in place, it is time to stabilize the culvert ends. Use landscape fabric and fieldstone to prevent unexpected erosion.

Step 5: Top the Culvert

Wait for the crossing to settle over the winter and spring before topping it with limestone or topsoil and grass.

Installing a culvert crossing on your property may seem like a daunting task, but it is manageable with the right steps. Remember to consider the base and slope, install the culvert, add fill material, stabilize the culvert ends, and top it off with the appropriate material. Happy crossing!

Installing A New Culvert Pipe

- The speaker is discussing a job they have to do involving putting in a culvert pipe and preparing the area for construction of a new house.

Steps of the Job:

- Stake out the area for the drive

- Scrape off the grass

- Set the culvert pipe and add flatter deals to the ends

- Add riprap and base rock

- Scrape off clay and pack it for stability

- Clean out ditch and add riprap to the edges

- Load up the trailer with rock

Challenges Faced:

- Difficulty finding the right tools for the job (e.g. a 3/4 inch wrench)

- Dealing with the soft ground

- Disliking the use of metal flares

- The job was completed for the day with the addition of riprap and rock

- The speaker plans to return with another load of rock and begin work on the driveway

- The goal is to see how the area holds up with rain and prepare for construction of the new house.

Installing a small culvert pipe

Installing a Culvert Pipe on a Driveway: A Job Overview

- The plan is to install an 8 inch by 20 foot culvert pipe on a driveway to fix a water drainage problem.

- Despite having looked at the job months ago, the contractor got the job instead, but the speaker ended up doing it anyway.

- Utility lines may be present, but calling Dig Safe is not an option due to high costs.

Installation Process:

- Using an excavator, the speaker breaks out the Scrabble to make room for the culvert pipe.

- The pipe is positioned where it is needed to direct water flow.

- Water now flows through the pipe and out on the other side, fixing the drainage problem.

- The job was completed smoothly and efficiently.

- Despite not calling Dig Safe, the speaker was careful and did not encounter any issues.

- On to the next job!

How To Install a 12" Driveway Culvert in 20 Minutes

Hey there, I'm Chris and welcome to my channel where I share my journey of building our family cabin. In this video, I'll show you how I installed a 12-inch culvert into the corner of my driveway to prevent water from washing it out in the spring. So, let's get started!

Installing the Culvert:

- Reason for Installation: The melting snow could run across the driveway and wash it out in the spring.

- Solution: Created a ditch on one side of the driveway to catch the water and bring it to the lowest point, which was in the corner.

- Process: Dug a trench across the driveway, ensured the grade was sufficient, and buried the culvert.

- Time taken: 20 minutes

- Result: Got about five inches of drop over 20 feet, which is plenty, and the water rushes down the hill on the other side.

That's it! Installing a culvert turned out to be a lot simpler than I initially thought, and it has saved me from potential damage to my driveway. I hope you found this video helpful, and if you want to see more of my journey building our family cabin, hit the subscribe button and turn on notifications. Thanks for watching!

How To: Lay a Singlestore pipe and join two pipes.

Welcome to this best practices guide for installing Tuber Cedar products. In this guide, we will provide you with step-by-step instructions on how to install a single store system with coupling band and gasket.

Key Points:

- Tuber Cedar pipes come with all necessary equipment for successful installation.

- Correct ground preparation is essential for successful installation.

- A template can be used to assist in shaping the bedding material.

- Gaskets are supplied cut to the correct length allowing for an overlap.

- Coating the inside of both halves of the coupling band with lubricant aids movement and reduces the risk of ripping the gasket.

- The nuts must be tightened in the correct order for achieving a uniform feel of the gasket.

- A final visual inspection of the gasket helps ensure even compression has been achieved by the coupling band.

Installation Steps:

1. Correct ground preparation is essential for successful installation. A bed prepared to support 20% of the circumference of the pipe is essential for larger pipes and beneficial for smaller and midsize pipes.

2. A template can be used to assist in shaping the bedding material. A deeper recession should be excavated at the point where pipes are to be joined.

3. Once the first pipe has been lowered into position in the trench, the second pipe can be lowered into position and adjusted to ensure correct alignment of both pipes.

4. Using the pre-dug recess, push the gasket underneath the pipes to be joined. Gaskets are supplied cut to the correct length allowing for an overlap.

5. Coating the inside of both halves of the coupling band with lubricant aids movement and reduces the risk of ripping the gasket. Apply the lower half of the coupling band and gently feed it through the trench recess applying pressure against the gasket as it is rotated into position.

6. Introduce the upper half of the coupling band and rotate it into position ensuring the gasket remains over the covering pipe joint. The studs and washers can now be inserted and the nuts hand tightened on both sides of the coupling band.

7. The nuts can now be fully tightened at each band joist. Follow the correct tightening order for all eight nuts. This is essential for achieving a uniform feel of the gasket. Failure to follow this order could potentially compromise the effectiveness of the gasket seal.

8. A final visual inspection of the gasket helps ensure even compression has been achieved by the coupling band. Backfill the recess made for the coupling band in the bedding ensuring that loose material is compacted firmly. This helps to minimize any movement at the coupling joints.

Installing Tuber Cedar products is easy when you follow the correct procedures. Correct ground preparation, the use of a template, and coating the inside of both halves of the coupling band with lubricant are all key steps to ensure a successful installation. By following the steps outlined in this guide, you can be confident in the installation of your Tuber Cedar products. For further information on these and other products within the Tuber Cedar range, please contact Tuber Cedar UK Limited.

Start your free trial today!

Try Pipiads free for trial, no credit card required. By entering your email,
You will be taken to the signup page.