#1 TikTok Ads Spy Tool

A Better Way to Make TikTok Ads Dropshipping & TikTok For Business

  • Find TikTok winning products & TikTok dropshipping ads.
  • Analyze TikTok advertisers
  • Get the Latest TikTok Shop Data.
Try It Free

makesupply shopify discount

Published on: July 7 2023 by pipiads

In this article, we will discuss a method for accurately determining the length of your gosset when making pouches, messenger bags, or any other similar items. We will also cover how to prepunch all of your stitching holes on the body parts and the gosset to ensure a nice even stitch.


- Start by marking your 1/8 inch stitching line all the way around your piece.

- Find the center point at the bottom of your front panel by measuring the overall width of your piece and splitting it in half.

- Use the center out method to mark your stitching holes from the center bottom of the front panel, on your back lid, and on your gosset.

- Punch all of your stitching holes through using your stitching chisels or wheel.

- Check to make sure you have an equal number of holes on both sides of each piece.

- Trim your gosset to the correct length using your front panel as a guide.

Using this method will ensure that your gosset is the correct length and that all of your stitching holes are evenly distributed on both sides. By following these steps, you can create professional-looking bags and pouches with ease.

Leather Shoulder Strap Pad - Free PDF Pattern Pack / Several Sizes

Hey, what's up! Justin from Make Supply here. I'm excited to announce the release of a new satchel template coming soon. But for this week's video, I'm doing a quick giveaway for a shoulder strap pad pattern pack.


- The pattern pack comes with three different designs and four different sizes.

- The designs include a completely rounded edge, a rounded rectangle, and a tapered rounded rectangle.

- The sizes are for a 1.5 inch strap, a 1.25 inch strap, a 1 inch strap, and a 0.75 inch strap.

- The download is free, and the link can be found in the description below.

- The pack includes markings for the slots to punch out and stitching holes marks on all of them.


1. Print out the template pattern pack and select the corresponding slot size based on your strap width.

2. Cut out the external piece and the slots.

3. Trace the template and slots onto the first piece of leather.

4. Cut out the external piece and punch out the slots.

5. Apply adhesive to the leather and attach the back half.

6. Cut around the bottom piece using the top piece as a guide.

7. Sand the edges and mark the stitching line.

8. Punch all the stitching holes through.

9. Finish the edges.

The shoulder strap pad pattern pack is a great addition to any bag-making project. It's easy to use and customizable based on your strap size and design preference. Plus, the download is free, so you can try it out without any commitment. Stay tuned for more bag templates coming soon!

Make A Leather MID-WALLET | (FREE PDF DOWNLOAD!) - Step By Step Build Along Instructions

Hey everyone, Justin from Makesupply here. Today's video is live from global quarantine, as I'm sure the rest of you are as well. We will be making the infamous leather mid wallet. This template set is available as a free PDF download, just follow the link in the description and video description below.

In this video, we will be making the infamous leather mid wallet. This article will guide you through the process step by step. We will be using tools that are readily available at all major leather craft stores or Amazon, nothing too out of the ordinary. Let's get started with inventory for this mid wallet project.


- PDF template set

- Cardstock paper or something firm to use to trace against

- Metal cork back ruler

- CS osborne scratch awl

- Number two exacto knife

- Winged divider or marking stitching line

- Generic Amazon mall for punching stitching holes

- Tiger red thread, size 0.8 mm

- Diamond stitching chisels

- Saya brand five millimeter six prong, two prong, and one prong

- John James needles

- Thread nippers

- Lighter

- Barge cement and Elmer's glue stick

- Binder clips

- Hand tools such as sandpaper, wood slicker, edge bevelers, skiving knife, and dremel tool

- Gum track for burnishing edges

- 5-inch zipper (if making zipper panel)

- Marble slab and rotary tool for punching holes

Template Set:

The template set is available as a free PDF download for you to print out at home and create with us today. The PDF will print out in five pages, with the first page being the outside body panel and the fifth page being the optional top collar and card slot. The template set is also available as an acrylic template set in our web store and on Etsy. Lastly, it is available as a laser-ready file/source file.


For the outside panel and top collar, we will be using Wicked and Craig Buck Brown Harness Leather, which is 3-4 ounces thick. For the inside, we will be using Wicked and Craig Skirting Leather, which is 2-3 ounces thick and unfinished.


1. Cut out the outside body panel and top collar from the leather.

2. Trace the inside body panel onto the leather and mark the holes using a scratch awl.

3. Punch holes where marked and cut out the inside body panel.

4. Cut out the bottom and upper back panels from the leather.

5. Cut out the zipper panel (if using) from the leather and mark the holes using a scratch awl.

6. Cut out the optional top collar and card slots from the leather.

7. Glue the top collar onto the outside body panel.

8. Assemble the card slots onto the inside body panel.

9. Stitch the panels together using the diamond stitching chisels and John James needles.

10. Burnish the edges using the hand tools and gum track.

11. Attach the zipper panel (if using) onto the back panels using glue and stitching.

12. Stitch the back panels onto the body panel, completing the wallet.

And there you have it, the infamous leather mid wallet. We hope this article has been helpful in guiding you through the process. Don't forget to use the inventory list and template set to make your own wallet. Happy crafting!

Make A Leather Can Sleeve | FREE PDF PATTERN!

making a loop around the first stitch and then going back through the same hole, pulling it tight. This will help secure the thread and prevent any gaps in the stitching. From there, it's just a matter of continuing the X stitch all the way around. Make sure to keep the tension even and tight, and check periodically to ensure that the edges are lining up correctly. Once you get to the end, tie off the thread with a knot and trim the excess. Congratulations, you've just made a leather koozie!

How I Find Apparel Manufacturers & Suppliers For My Clothing Line (Fashion Production)

Hey, it's Rob from Apparel Success. I run a successful Canadian clothing brand, and I want to share with you how I found all my manufacturers and suppliers. I'll take you on a journey from the beginning to where we are today, and show you how to potentially do the same for your brand.

Finding Manufacturers and Suppliers:

- Started with a company in Toronto that was terrible - screwed up our first 400 t-shirts and wouldn't communicate

- Decided to work with third-party suppliers instead of printing our own stuff

- Ordered samples and found All Style tees were the best for starting a private label clothing brand

- Ordered t-shirts from various suppliers and brought them to a screen printing facility called Astro Screen Printing in Toronto

- Worked with Astro for a few years until we found Avid Apparel, who does everything in-house

- Avid Apparel handles everything from conception to bagging, folding, and barcoding

- Look for three main things in a manufacturer/supplier: high-quality products, fast turnaround time, and good communication

- Full-service end-to-end providers with great communication are ideal

- Avid Apparel is a great resource in Canada, but minimum order quantities may be too high for new startup clothing brands

Don't settle for a manufacturer/supplier that has slow turnaround times and doesn't answer your emails. Look for a provider that handles everything well, communicates effectively, and provides high-quality products. Remember, it's all about enjoying the whole process.

5 TIPS for Starting Leathercraft (NO experience necessary!)

5 Tips for Getting Started in Leathercraft

In this article, we will be discussing five tips for those who are interested in getting started in leathercraft. We will focus on the macro view of leathercraft and provide tips on how to choose a product niche, invest in sharp tools, avoid cheap leather, understand leather weights, and use patterns from day one.

Tip #1: Choose a Product Niche:

- Focus on a product category such as card holders, wallets, gun holsters, sheaths, belts, camera straps, or guitar straps.

- Narrowing down your focus will help you save money and avoid buying unnecessary tools and materials.

- Take inspiration from social media, specifically Instagram, to see what projects stand out to you.

Tip #2: Invest in Sharp Tools:

- Sharp tools are important in leathercraft for safety and a good result on your project.

- Cutting tools like knives, skiving knives, edgers, and hole punchers should be adequately sharp and well-maintained.

- Investing in sharp tools can mean spending money or time maintaining them, but it's worth it for clean cuts and safe hands.

Tip #3: Avoid Cheap Leather:

- Working with poor quality, cheap leather can give you a poor result on your project and an unenjoyable experience.

- Investing in project panels, which are smaller sections of high-quality leather sold for specific projects, is an affordable way to gain experience with a variety of leathers.

Tip #4: Understand Leather Weights:

- Leather weights refer to the thickness of the leather you're using.

- Generally, certain leather weights are used for specific projects such as card holders or belts.

- Consider the leather weight when shopping for leather to ensure it's suitable for your project.

Tip #5: Use Patterns from Day One:

- Use patterns to maximize hands-on practice time and learn basic techniques.

- Designing patterns is a separate skill set that you can learn later.

- There are many free and paid patterns available for any project you might be interested in.

By following these tips, you can save time and money, avoid mistakes, and make leathercraft an enjoyable hobby to pursue. Choose a product niche, invest in sharp tools, avoid cheap leather, understand leather weights, and use patterns from day one to get started on the right foot in leathercraft.

Unboxing A New Clicker Die | Lets Make Some Keychains!

- In this video, we will be unboxing and reviewing a new keychain clicker die.

- We will also be testing it out by making a few keychains.

Key Points:

- The die is from Texas Custom Dies and has been a reliable source for all the dies.

- The acrylic version of the template has been used to test out the spacing of the keychain design.

- The steel rule die version comes with a soft foam material, with steel rule on the outside and the hole punches on the inside.

- The leather used is from Wicked and Craig, including russet harness, natural veg, brown dark brown butter, and buck brown harness leather.

- The hardware used is from Buckle Guy, including brass and nickel-plated trigger snaps, double cap rivets, and key rings.

- The cutouts look great and the hole alignment is accurate.

- The final products look amazing and the die came out great.

- If you are looking for a reliable source for dies, Texas Custom Dies is highly recommended.

Start your free trial today!

Try Pipiads free for trial, no credit card required. By entering your email,
You will be taken to the signup page.